1 / 4
Details
ConditionNew
Description
TO Operate the detector
1) Install the Batteries
a. Use a 9-Volt ALKALINE or Ni-Cd battery
b. Install battery with correct polanty (align" on detector housing with on battery)
c. The battery cover opens and closes with a screwdriver
Battety
2) Set the Sound/Vibrate switch to sound" and "Vibrate
a. Forward position (S) Sound ON
- Alarm
b. Center position (O): Power OFF
c. Back position (V): Vibrate ON
← Power
3) Sweep the Detector over the target area. Detector must be IN MOTION to detect metal
4) Read this manual for proper training in the detection metal objects
Batteries
Use 9-Volt ALKALINE or Ni-Cd battery
Sound
Low Battery Alert
Power OFF
The RED LED indicator light will illuminate and remain illuminated when the batteries are discharged to the point at which the detector has lost 10% of its metal detecting range.
- Vibrate
The sound alert will also lengthen the tone will sound for a longer period of time)upon detection of metal objects, when the battenes become discharged to the point at which the detector has lost 10% of its metal detecting range.
The detector will continue to operate, at a lower sonsitivity when the Low Battery Indicators are activated. Replace batteries as soon as possible after these indicators activate.
LED Indicators
The RED light indicates LOW BATTERY
The YELLOW light indicates the detection of a metal object
The GREEN light indicates that the detector is ON
Made in Germany
Listed by private user
Ahmad Hameed
Member since Oct 2024
See profile
Location
Pakistan
Ad id 1099046331
Report this ad