1 / 5
Description
) Install the Batteries
a. Use a B-Volt ALKALINE or Ni-Cd battery
b. Install battery with comect polanty (allignon detector housing with on battery)
The battery cover opens and closes with a screwdriver
Battety
2) Set the Sound/Vibrate switch to sound and "Vibrate
a Forward postico (S) Sound ON
- Alarm
b. Center position (0) Power OFF
- Power
e Back position (V)
Vibrate ON
3) Sweep the Detector over the target aren Detector must be IN MOTION to detect matal
4) Read this manual bar proper traming in the detectio metal objects
Batteries
Use 9-Volt ALKALINE or Ni-Cd battery
Sound
Low Battery Alert
Power OFF
The RED LED indicator light will illuminate and remain illuminated when the batteries are discharged to the pont at which the detector has lost 10% of its metal detecting range
Vibrate
The sound alert will also lengthen the tone will sound for a longer penod of timejupon detection of metal objects, when the batteriens become dischanged to the point at which the detector has lost 10% of its metal detecting roug
The detector will continue to operate, at a lower sensitivity when the Low Battery Indicators are acthatod Replace battenes as soon ors posible after the Indicators activate
LED Indicators
The RED light indicates LOW BATTERY
The YELLOW light indicates the detection of a metal object
The GREEN light indicates that the detector 16 ON
Charger Jack
Listed by private user
EURO SECURITY
Member since Oct 2024
See profile
Location
Pakistan
Ad id 1099175007
Report this ad