Description
Any appliance with a plug socket can be powered remotely up to a distance of 30 metres. It uses Radio Frequency so the remote does not need to be pointed at the socket and can work through walls.
Specifications:
Transmitter battery:
12V/23A (Order Code
JG91 for replacement)
Transmitter radio frequency:
Each RF socket has 4 channels than can be set from the switch
433.92MHz
at the back.
For example, if you had 3 lamps plugged into the RF sockets on
Receiver voltage:
different channels/codes you could turn them on and off
220/240V / 50Hz / IP20
individually or if set on the same channel/code you could turn them all on and off at the same time.
To operate, set the dial on the reverse of the product to the channel required and fit the small battery to the transmitter. Plug the socket in to the required wall outlet and it's ready to use.
Receiver maximum wattage:
3120W
Transmission range:
Typically 30m
(clear line of sight)
Contents:
3 remote sockets
Remote control
12V 23A battery for remote control
Additional sockets are available, Order Code N77KA, sold separately