Description
Processor Dual ARM1156T2S @ 515 MHz
Memory
4MB flash, 1GB flash ROM, 512MB SDRAM
Packet buffer size: 6MB
Performance Latency :
1000Mb : < 2.9 µs (FIFO)
10 Gb/s : < 1.3 µs (FIFO)
Throughput :
up to 131 million pps
Switching capacity :
176 Gb/s
Routing table size :
2000 entries
MAC address table size :
16,000 entries
Ports
44 auto-sensing 10/100/1000 ports :
IEEE 802.3 Type 10Base-T
IEEE 802.3u Type 100Base-TX
IEEE 802.3ab Type 1000Base-T
Media Type :
Auto-MDIX
Duplex: 10Base-T/100Base-TX: half or full
1000Base-T: full only
4 dual-personality ports :
Each port can be used as either an RJ-45 10/100/1000 port or as a mini-GBIC slot (For use with mini-GBIC transceivers)
1 RJ-45 serial console port
Supports a maximum of four 10 GbE ports, with optional module
Management
HPE ProCurve Manager Plus
HPE ProCurve Manager
Command-line interface
Web browser
Out-of-band management (serial RS-232C)
NOTE: When using mini-GBICs with this product, mini-GBICs with revision B or later (product number ends with the letter B or later, e. g. , J4858B, J4859C) are required.
Physical Specifications
Feature Description
Dimensions(d)*(w)*(h) 36.58 x 44.25 x 4.39 cm (14.4 x 17.42x 1.73 in) (1U height)
Weight 5.88 kg (12.96 lb)
Mounting Mounts in an EIA-standard 19 in telco rack or equipment cabinet ; horizontal surface mounting only
Environmental Specifications
Feature Description
Operating temperature 0º C to 55º C (32º F to 131º F)
Operating relative humidity 15% to 95% @ 40º C (104º F), non-condensing
Non-operating/Storage temperature -40º C to 70º C (-40º F to 158º F)
Non-operating/Storage relative humidity 15% to 95% @ 65º C (149º F), non-condensing
Altitude up to 3 km (10,000 ft)
Acoustic Power: 51.5 dB, Pressure: 38.1 dB; DIN 45635T. 19 per ISO 7779
Electrical Specifications
Feature Description
Voltage 100-127/200-240 V
Current 6.4/3.2 A
Idle power 89 W
Power consumption 556 W
Frequency 50/60 Hz
Maximum heat dissipation 704 kJ/hr (667 BTU/hr)
Description The switch automatically adjusts to any voltage between 100-127 and 200-240 V and frequency either 50 or 60 Hz