Description
()3II-9()7727() Deals in all kind of imported diesel generators (PERKINS CUMMINS JHONDEERE AND ALL OTHER JAPANESE BRANDS)
On Every Purchase We Offer
Longest Warranty Duration - Free Installation and Delivery Services - Free Battery and Generator Placement.
Output Ratings
Prime kVA(Kw) 20(16) Standby kVA(Kw) 22(17.6) Ratings at 0.8 power factor, Voltage, Frequency 400/230 V, 50 Hz
Ratings and Performance Data
Engine Make Perkins UK
Engine Model: Share Separately
Alternator Make Stamford UK or Leroy Somers France
Control Panel:DSE4520
Base Frame: Heavy Duty Fabricated Steel
Circuit Breaker Type:3 Pole MCB
Frequency : 50 HZ
Engine Speed : 1500RPM
Alignment IN LINE
Cycle C4 STROKE
Bore mm (in) 84 (3.3)
Stroke mm (in) 100 (3.9)
Induction NATURALLY ASPIRATED
Cooling Method WATER
Governing Type MECHANICAL
Governing Class ISO 8528
Compression Ratio 23.3:1
Voltage 12
Ground Negative
Battery Charger Amps 65
Engine Weight Dry kg (lb)(View phone number)
Engine Weight Wet kg (lb)(View phone number)
Engine Performance Data 50 Hz 60 Hz
Engine Speed 1500rpm
Gross Engine Power Prime kW (hp)18.7 (25)
Gross Engine Power Standby kW (hp)20.6 (28)
BMEP Prime kPa (psi)(View phone number)
BMEP Standby kPa (psi)(View phone number)
Fuel System
Fuel Filter Type : Replaceable Element
Alternator Physical Data
No. of Bearings : 1
Insulation Class : H
Winding Pitch: 2/3
Winding Code6S
Wires:4
Ingress Protection Rating:IP23
Excitation System: SHUNT
AVR Model:R120
Generator Set Standards
The equipment meets the following standards: BS5000, ISO 8528, ISO 3046, IEC 60034, NEMA MG-1.22.
Prime Rating
These ratings are applicable for supplying continuous electrical power (at variable load) in lieu of commercially purchased power. There is no limitation to the annual hours of operation and this model can supply 10% overload power for 1 hour in 12 hours.
Standby Rating
These ratings are applicable for supplying continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted on these ratings. The alternator on this model is peak continuous rated (as defined in ISO 8528-3).
Standard Reference Conditions
Note: Standard reference conditions 25°C (77°F) Air Inlet Temp, 100m (328 ft) A. S. L. 30% relative humidity.
Fuel consumption data at full load with diesel fuel with specific gravity of 0.85 and conforming to BS2869: 1998, Class A2.
PEGC offer a range of optional features to allow you to tailor our generator sets to meet your power needs. Options available include:
• Upgrade to CE Certification
• A wide range of Sound Attenuated Enclosures
• A variety of generator set control and synchronizing panels
• Additional alarms and shutdowns
• A selection of exhaust silencer noise levels
For further information on all of the standard and optional features accompanying this product please contact.