Description
>Product description
DG 572-1 is a clear base coat that is formulated for low viscosity and fast-drying. This coating material features a good isolation effect for use on resinous woods that are rich in active substances and is best suited for base coats on very dark stained woods. DG 572-1 is also suitable for stabilising softwood (improving scratch resistance). Moreover, sinkage is further reduced with DG 572-1 as an isolation sealer within a complete coating using high-solid, clear base coats and high gloss lacquers.
>Areas of application
DG 572-1 can be used for shopfitting and on all interior fixtures and fittings, including in kitchens and bathrooms as well as for coatings in ship interiors.
>Surface Preparation Surface preparation
Substrate sanding grits from-to
Intermediate lacquer sanding (grits) from-to
Clean, dry wood, dependent upon wood type and method of application(View phone number)
(View phone number)
After sufficient drying and intermediate sanding with almost all Hesse PU lacquers.
Finishing
>Times Usage time
Pot life
Drying Stackable after Complete drying
>Application Application Spraying
2C line
Airless
Airless low pressure
Air mix
Compressed air spraying High-performance automatic spraying unit Automatic spray gun Spraying robot
>Processing instructions
The process sequence and the
a trial coating to the original wood. Washing the wood beforehand with Hesse Wood soap BZ 850 or Hesse Thinner DV 490 can reduce the amount of work involved. Please note that there may be changes to the colour and expres- siveness of the wood as a result. A drying time of 16 h / 20 °C must be adhered to when working with content-rich wood species! DG 572-1 can additionally be used on content-rich, resinous woods or even on exotic wood species as an isolation sealer for transparent and coloured HYDRO lacquers. It should be noted that DG 572-1 must not be sand- ed back to the bare wood after drying and the required lacquer sanding. Please also observe the technical information for the respective HYDRO product. Conduct a trial coating on the original wood as necessary.
Hesse GmbH & Co. KG, Warendorfer Str. 21, D -59075 Hamm www. hesse-lignal. de Tel. (View phone number) Status: (View phone number) / 3
30 - 60 min / 20 °C
1 h / 20 2 h / 20 > 16 h / 7 d / 20
Nozzle size in mm
0,23 - 0,28
0,23 - 0,28 1,8 - 2,0
°C
°C
20 °C °C